Productivity
The new dynamic load sensing hydraulic steering system provides the forklift truck with reduced hydraulic loss and improved energy efficiency
Reliability
The material handling equipment is equipped with the Okamura transmission. The brake drum and hub adopt inblock structure design.
Bigger diameter of steering cylinder
The drive axle is improved into the inblock design
Improved integral casting steering axle
Environmental friendliness
Each of our counterbalance forklift trucks employs a specially developed engine for the optimum balance of power and superior environmental performance. Cummins engine QSF2.8T4F is in compliance with the EU stage-IIIB regulation.
The exhaust after-treatment devices such as diesel oxidation catalysts are adopted to make sure the engine emission meets Europe stage IIIB and USA Tier 4 Final standards. The engine also comes with good noise reduction performance and the maintenance is minimal.
Easy maintenance
The Cummins engine uses a special air filter to reduce the air intake resistance dramatically. It is also equipped with a pressure alarm to remind maintenance for filter element.
Model | CPCD40 | CPCD45 | CPCD50 | CPCD55 | CPCD40 | CPCD45 | CPCD50 | CPCD55 | |
Power | Diesel | Diesel | Diesel | Diesel | Diesel | Diesel | Diesel | Diesel | |
Rated capacity | kg | 4000(3500) | 4500(4000) | 5000(4500) | 5500(5000) | 4000(3500) | 4500(4000) | 5000(4500) | 5500(5000) |
Load centre | mm | 500(600) | 500(600) | ||||||
Service weight | kg | 6500 | 6700 | 6850 | 7250 | 6500 | 6700 | 6850 | 7250 |
Height of overhead guard | mm | 2270 | 2270 | ||||||
Length to face of forks | mm | 3085 | 3115 | 3260 | 3330 | 3085 | 3115 | 3260 | 3330 |
Overall width | mm | 1420 | 1503 | 1420 | 1503 | ||||
Forks, L*W*T | mm | 1070x 122x50 |
1070x 150x50 |
1070x 150x50 |
1200x 150x60 |
1070x 122x50 |
1070x 150x50 |
1070x 150x50 |
1200x 150x60 |
Turning radius | mm | 2690 | 2720 | 2875 | 2905 | 2690 | 2720 | 2875 | 2905 |
Model | CPQYD40 CPYD40 |
CPQYD45 CPYD45 |
CPQYD50 CPYD50 |
CPQYD55 CPYD55 |
|
Power | DUAL FUEL/LPG | DUAL FUEL/LPG | DUAL FUEL/LPG | DUAL FUEL/LPG | |
Rated capacity | kg | 4000(3500) | 4500(4000) | 5000(4500) | 5500(5000) |
Load centre | mm | 500(600) | |||
Service weight | kg | 6500 | 6700 | 6850 | 7250 |
Height of overhead guard | mm | 2270 | |||
Length to face of forks | mm | 3085 | 3115 | 3260 | 3330 |
Overall width | mm | 1420 | 1503 | ||
Forks, L*W*T | mm | 1070x122x50 | 1070x150x50 | 1070x150x50 | 1200x150x60 |
Turning radius | mm | 2690 | 2720 | 2875 | 2905 |